Speedy 28mm Stud 2 Sided Bay Window Curtain Pole Antique Brass

Introducing the Speedy 28mm Stud 2 Sided Bay Window Curtain Pole in Antique Brass! This stylish and functional curtain pole is designed for bay windows that require a small and dainty finial end.The antique brass finish adds a touch of elegance to any room, while the 28mm diameter ensures sturdiness and durability. With its two-sided design, you can hang multiple curtains for added privacy and light control. Upgrade your bay window with this Speedy curtain pole and enjoy a seamless and sophisticated look in your home.

Supplied with a pair of end finials, poles, rings, joint and brackets.
The finials for the ends of the bay are easily slotted into place and tightened in place with a grub screw.
The poles supplied with each kit will vary in length, please refer to the table for the number of poles per kit. All poles are to be cut down to size to fit your bay window. This can be done using a fine tooth hacksaw. In kits where 3 poles are supplied, you will need to connect 2 of them to provide a long length pole. A silver connector is supplied with this kit that is inserted inside the 2 poles, thus hidden.
The passing rings in this kit are C shaped and can pass through the brackets. Please ensure you use tightly gathered pleated curtains and only medium in weight to allow the hook on the ring remain hanging downwards. Placing the curtain hook on the top part of the curtain heading will also enable the ring to hang down correctly.
The joint in this kit can be used in any angled bay as you bend this by hand to fit inside the awkward space. Please ensure you bend this correctly with the serrated area facing you, or else it will break apart. We advise bending this joint slowly and patiently to fit the corner of the bay as once bent you cannot adjust this back to the original state. The joint will allow the rings to pass through with a smooth glide. The ends of the joint slot into the pole creating a continuous pole throughout the bay.
The passing brackets supplied in each kit will vary in quantity. Please check the table. The rings can pass past these with no interruption. The back plate measures 50mm. The bracket extention is between 110-125mm.
Please note, no screws or plugs supplied with this kit. 
Fitting guides are emailed after an order has been placed.
This kit is sent in 2 sperate deliveries.