Hallis Arc 25mm Soft Brass Hammered Curtain Pole

The Hallis Arc 25mm metal curtain pole with hammered disc finials, is finished in soft brass – a metallic, powder coated finish. It is part of the beautiful Arc collection by Hallis Hudson, which thanks to its simplicity, is both elegant and enduring.

Made in England, the Arc range is carefully prepared by hand using high grade, heavy gauge steel. Available in a choice of 10 contemporary, powder coated finishes, the Arc collection also offers 4 modern finial designs.

This brass curtain pole set is supplied with a pair of hammered disc finials, pole, smooth round rings, and strong, supporting wall brackets. Please note that the bracket screws are not colour matched.

The hammered disc finials are attached to the pole using a small grub screw. Please see the additional image for an end view of the hammered disc finial.

All bracket styles in this range are of a fixed projection from the wall, of 100mm. Poles that are 250cm and over, come with a centre bracket to be used as additional support at the centre point of the pole. The 500cm and 600cm pole kits come with an additional 2 passing brackets. These are to be used at the mid-way point, between the centre bracket and the bracket at each end.

Poles that are longer than 250cm, come in 2 pieces, with a joining piece.

Please see the specification table below, for the number of rings provided for each length of pole. Pole sets of 500cm and 600cm will include passing rings, which are needed to pass over the additional brackets that these lengths require.

All of our poles can easily be cut to size using a small fine tooth saw. This means that the 25mm hammered disc curtain pole in brass from the Hallis Arc range really is fit for any straight window.